12 Volt DC Diesel Transfer Pumps Made in Germany
Technical data
Connecting cable with battery terminal clips, length (m) / (ft): 3 / 10
Connection suction side: G 1'' female
Connection discharge side: G 1'' female
Hydraulic data
Pump design: vane pump, selfpriming
Delivery rate under free discharge up to (l/min) / (gpm): 35 / 9.2
Suction height up to (m) / (ft): 3 / 10
Discharge pressure up to (bar) / (psi): 1,6 / 23.2
Pumping media: fuel oil and diesel
Motor data
Insulation class: F
Highest permissible limit temperature (°C) / (°F): 155 / 311
Voltage (V): 12 V DC
Power consumption (A): 19
Power (W): 230
Fuse (A): 25 A plug-in fuse
Duty cycle (min) under free discharge max.: 180
Run time (min) when dispensing valve is closed max.: 2
Torque (Nm): 0,38
Rotation speed (rpm): 3000
Type of construction: IMB 5
Safety class: IP66
Materials of parts in contact with liquid
Seals: FKM (Viton®)/NBR
Pump housing: AlSi 12 (sea water resistant)
Rotor: GG 25
Vane: POM
Dimensions LxWxH (mm) / (inch): 270 x 120 x 120 / 10.6 x 4.7 x 4.7
Weight (kg) / (lb): 5 / 11
Specification
● Vane pump, with integral bypass
● On/Off switch
● Fuse
● Siphon protection acc. to WHG (German government regulation for environmental
care), continuously active
● Installation of flowmeter NUMERIxx