Pressol Pneumatic Pump Oil and Waste Oil 1:1
Pressol Pneumatic Pump Oil and Waste Oil 1:1
Item No: 19185
Operate pneumatic-pump with maintaining unit 20 218 950
For wall-mounting
Technical Data
Pressure ratio: 1:1
Max. diameter (mm): 130
Max. air pressure (bar): 10
Min. air pressure (bar): 2
Recommended air pressure (bar): 8
Cylinder capacity engine cm³: 220
Cylinder capacity pump cm³: 220
Quantity of strokes at 8 bar at a
Free-flow (min.): 240
Pump capacity at 8 bar at a
Free-flow (l/min): 66
Pump pressure at 8 bar air
Pressure (bar): 8
Air consumption at 8 bar air
Pressure (l/min): 450
Length of discharge pipe work: Depends on size of installation.
Max. suction heigth: 6 m, suction tube G 1″
Compressed air connection: G 1/4″ female
Oil connection – suction side: G 3/4″ male
Oil connection – delivery side: G 3/4″ male
Noise level idle running acc. To ISO 9614-2 at a distance of 2 m (db A): 78
Noise level under load acc. to ISO 9614-2 at a distance of 2 m (db A): 77
Viscosity of discharged liquid: oil up to ISO VG 15 SAE 5
Classical liquids to be discharged: diesel and oil
Time duration for 1 complete container draining: 200 l diesel in 3 minutes
Colour: blue Pantone 294 c
Length of engine (mm): 375
Weight engine (kg): 4,300
specification
pneumatic oil- and diesel pump 1:1.
Does not correspond to German calibration law (NEF).
For wall-mounting
Accessories required:
Suction tubes (19 522), (19 523), (19 523 001)
Suction hose (19 512)
Wall mounting bracket (19 521)
To discharge low viscosity self-lubricating liquids, such as diesel, fuel
oil and engine oil
Due to its high delivery rate, it can be used as a filling pump
All Products 2 years warranty.
